Switch to Electric Heat Pumps

Get an assessment

Learning about a new heat pump mini split provided by MCE.

Take Advantage of Available Rebates

Enjoy maximum home comfort and safety with reduced energy use.

Get rebates for installing a heat pump water heater, when you work with a licensed contractor from MCE’s list of professionals with experience installing this equipment.

If your water heater is nearing its typical 15-year lifespan, now is the right time to learn about heat pump replacements. Start by watching these short videos at mceCleanEnergy.org/home-electrification

What You’ll Get

Deyfi’s new heat pump water heater uses less energy than her old gas heater

$3,000 rebate for installing a heat pump water heater; additional $2,000 rebate if you install a heat pump water heater that uses ultra-low global warming potential (GWP) refrigerants
Rebate of up to $400 per 500 square feet for installing a heat pump heating and cooling system
Free home energy assessment with a licensed contractor
Reduce your energy usage by up to 75% by switching to heat pumps, which may help lower your energy bill
Eliminate the risk of dangerous gas leaks, making your home safer

Estimated Costs

While the upfront cost can be higher, heat pump water heaters can save you money over time. MCE offers rebates for two different equipment options. Rebates cannot be combined. 

Estimated costs below are based on average project costs in MCE’s service area and will vary. 

Standard Heat Pump Water Heater

Equipment and installation:

$8,270

MCE rebate:

$3,000

Total cost:

$5,270

*Based on average costs for homes in MCE’s service area

Ultra-Low GWP Heat Pump Water Heater

Equipment and installation:

$14,270

MCE rebate:

$5,000

Total cost:

$9,270

*Ultra-low global warming potential (GWP) equipment tends to be more expensive and have a more involved installation than standard heat pump water heaters. 

TIP

Check our Rebate and Incentive Finder for additional savings available to you.

Who’s Eligible

MCE customers who install a heat pump water heater with a participating contractor.

How It Works

mce_green-circle-number-1

Choose an eligible contractor

Visit our Contractor Finder tool to choose a licensed contractor who “Offers MCE’s Rebate.” These contractors serve MCE customers and have experience installing heat pump equipment. 

mce_green-circle-number-2

Get a free home assessment

Your contractor will provide you with a free home assessment and a quote that includes equipment recommendations, electrical requirements, and MCE’s rebate.

MCE_icon_number_3

Install your heat pump

Your contractor will install your new heat pump and handle your rebate application and program requirements. Depending on your contractor, your rebate will either be an upfront discount or a reimbursement after your project has been completed.

Frequently Asked Questions

If the contractor you’d like to work with doesn’t currently offer MCE’s rebate, you can encourage the contractor to complete the Contractor Interest Form to enroll in MCE’s program. Enrollment is simple and won’t delay your project. Contractors must enroll in MCE’s Flex Market Residential program to obtain your rebate.

No, to qualify for MCE’s rebate, a project must be installed by a participating contractor who will process the rebate application paperwork on your behalf.

No, MCE’s rebate cannot be applied to a project retroactively. As long as the new equipment has not yet been installed, your contractor may apply for the rebate. 

Rebates can be expected 6-8 weeks after your heat pump installation is complete.

Standard heat pump water heaters with low GWP (global warming potential) refrigerants qualify for a $3,000 rebate. Models with ultra-low GWP refrigerants less than 10, qualify for a $5,000 rebate and have a lower environmental impact. Ask your contractor which option is right for you. 

The advantages are related to your environmental impact. If there is a refrigerant leak, ultra-low global warming potential (GWP) refrigerants have almost no environmental impact. Ultra-low GWP equipment is often built to commercial-grade standards, which may offer longer expected lifespans. There is no noticeable difference in day-to-day use.

Ultra-low GWP (global warming potential) heat pump water heaters are more expensive than standard heat pump water heaters due to equipment costs and installation requirements. Installation can include ground leveling, a pad, and running water lines. Increased cost of equipment, additional materials, and labor all contribute to the higher costs of ultra-low GWP systems. 

You may be able to stack additional rebates for extra savings – check MCE’s rebate and incentive finder for other savings opportunities. Don’t forget to also ask your contractor to make sure you’re stacking all available rebates.

Questions?

Contact us at info@mceCleanEnergy.org or call (888) 632-3674, Mon–Fri from 9 am to 5 pm.

Find More MCE Residential Solutions

MCE offers many opportunities for you to save money while protecting the environment. Explore and learn more.

Find local, state, and federal rebates and incentives

Learn More
Want to save more?
Discover why your neighbors are making electric upgrades
Learn More
Learn more about home electrification
Explore all of MCE’s programs and offers
Learn More
Discover more ways to save with MCE
MCE Logo color